Friday 16 September 2022

Calibrar scanner portable

Hablan de un PDS-ST415-VP, pero un Werlisa TSN410 es similar.

Here you will find the manual on how to calibrate your viewpoint. Mine is not listed – PDS-ST410-VP however the PDS-ST410A-VP is still about the same – it has a clock setting , mine does not – that is the only d ifference…….5.7 How to calibrate the scanner

NOTE: Perform calibration only when white balance needs adjustment

  1. With the dry cleaning cloth provided, clean the scanning lens located on the bottom of the scanner.
  2. Turn on the scanner by pressing the [POWER] button. Place the scanner on the white area of the White Balance Calibration paper provided.
  3. Press and hold the [JPG/PDF] button. While holding the [JPG/PDF] button, press the [POWER] button and then release both buttons to enter into auto-calibration mode. SD symbol will flash and then stop. “GREEN” and “RED” LED light will turn on.
  4. Do not move the scanner. Wait until the “RED” LED turns off. “GREEN” LED will stay on.
  5. With only the “GREEN” LED light on, start scanning the white paper by sliding the scanner across the paper until the “GREEN” LED light turns off. (Slide the scanner backwards if necessary).
  6. Press and hold the [POWER] button to power off the scanner. Calibration is complete
Posted by at

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)